McLaren Customer Racing takes track performance to a new level with the 720S GT3X
720S GT3X developed by McLaren Customer Racing for track use only, without restriction of motorsport regulations
Based on 720S GT3 race car, but not homologated for racing
Hand-built, twin-turbocharged 4.0-litre V8 develops up to 750PS
McLaren Customer Racinghas confirmed that an unrestricted version of its 720S GT3 race car, the 720S GT3X, is available to order through the McLaren Motorsport Retailer Network. Designed and developed in-house by the motorsport arm of McLaren Automotive, the GT3X is for track use only but is not homologated for any racing class or championship. Without the need to comply with competition regulations, increased levels of power and performance have allowed McLaren Customer Racing to further exploit the chassis and aerodynamic characteristics of its latest-specification, race-winning 720S GT3 to optimise circuit driving enjoyment.
Pioneering in the field of lightweight and safety in motorsport, McLaren introduced the first all-carbon fibre chassis to Formula 1 in 1981 with the McLaren MP4/1. Since then, carbon fibre has been at the core of every McLaren and the 720S GT3X features the MonoCage II chassis that provides a strong, light and safe environment for its occupants.
Performance comes from a hand-built 4.0-litre twin-turbocharged engine, optimised to combine features from the 720S road car and the 720S GT3 race car. Coupled to a six-speed sequential motorsport transmission, a unique version of the M840T engine features a blueprinted cylinder head, strengthened pistons, ‘Diamond Like Carbon’ (DLC) coating and a lightweight performance exhaust system. The track-focused components and systems deliver the same 720PS (710bhp) as the road car, with a further 30PS (30bhp) boost function available to the driver through a steering wheel-mounted ‘push-to-pass’ button.
The lightweight 720S GT3X tips the scales at just 1,210kg (2,668lbs) and displays the extreme weight-saving efforts that have been taken into consideration to remove all non-essential or luxury items where possible, leaving the driver with just what they need to extract the best performance. Each of these measures combine to give the 720S GT3X a power-to-weight ratio of 620PS*-per-tonne.
The development programme has seen a focus on pure engineering, innovative aerodynamics and efficient design, with thousands of track kilometres covered across Europe and the Middle East. Freed from sporting regulations, the 720S GT3X is a performance-optimised version of the already-bespoke GT3 race car, with the bodywork’s flowing lines developed using ‘Computational Fluid Dynamics’ (CFD) and Formula 1 wind tunnel technology. The aerodynamically sculpted shape is hand-finished in metallic MSO Carbon Black paint. A refined pinstripe in heritage McLaren Orange – a nod to the historic race-winning McLaren Formula 1 cars of the 1960s – accentuates the lower edges of the ground-hugging body shape and the outer rim of the gloss black centre-locking wheel rims, while an ‘X’ graphic stretches across the upper canopy.
The stripped-out cabin features extensive use of lightweight carbon fibre and is designed around outright track performance and functionality. A carbon fibre and Kevlar FIA-approved race seat hugs the driver, while the pedal box and steering wheel adjust to ensure the perfect driving position. The ergonomically-designed race steering wheel is fitted with all key functions via intuitive rotary switches and buttons meaning everything is at the driver’s fingertips. Thrill-seeking friends can also experience the speeds and exhilaration of being on a track as the interior of the 720S GT3X has been designed to accommodate a fully safety-compliant race seat on the passenger side of the cabin, complete with six-point race harness. Modifications over the race car include a revised design to the roll-cage to accommodate a passenger without compromising on safety and enhanced crash structures around the occupant safety cell.
In addition to delivering a new type of performance on the track, the 720S GT3X delivers a new level of ownership experience. As part of the purchase and ownership package, McLaren Automotive can provide dedicated technical track support for each owner. This programme is carried out by the customer support engineers from the in-house McLaren Customer Racing division – the team that has designed and developed the model alongside the 720S GT3 global customer race program.
“Due to GT3 balance of performance requirements, the 720S GT3 car has to run with a considerably reduced power output than the road-going 720S Spider and Coupe variants. The brief for the GT3X project was to unleash the full potential of the 720S GT3 car using a massively increased power output to fully exploit the aerodynamics and chassis dynamics of the car. Additionally, the car is now able to carry passengers for the first time, thanks to the re-design of a new bespoke roll-cage and passenger seat installation. Brake cooling has also been improved to cope with the additional demands of increased speed and the mass of a passenger.
The 720S GT3X now offers a unique opportunity to experience a fully-fledged GT3 car. The lap time is significantly reduced from the GT3 benchmark through both the huge standard power increase and the additional 30bhp from the push-to-pass button. The end result is a car that offers a truly unique experience.” Ian Morgan, Director, McLaren Customer Racing
The 720S GT3X is available to order now from the 11 official McLaren Motorsport Retailers worldwide: McLaren Glasgow, McLaren Zurich, McLaren Frankfurt, McLaren Beverly Hills, McLaren Houston, McLaren Newport Beach, McLaren Philadelphia, McLaren San Francisco, McLaren Toronto, McLaren Auckland and McLaren Melbourne. Each retailer can also offer technical and servicing support for the track-only model.
Rob Bell, McLaren Factory Driver, demonstrates the capabilities of the McLaren 720S GT3X on the Portimao Circuit,
McLaren Automotive has enjoyed significant success with its range of pioneering sports and supercars since the start of production in 2011. Alongside its road-focused models, the company has been winning races with motorsport derivatives of key models since 2012. Based on the highly-accomplished 720S road car, the 720S GT3 debuted in 2019 with private race teams competing at the highest level – and proved immediately successful. In fact, in its first race, the 720S GT3 took pole position and went on to score its first ever race win against a field of world-class opposition, proving that McLaren had designed and developed another race-winner.
About McLaren Automotive:
McLaren Automotive is a creator of luxury, high-performance supercars.
Every vehicle is hand-assembled at the McLaren Production Centre (MPC) in Woking, Surrey, England.
Launched in 2010, the company is now the largest part of the McLaren Group.
The company’s product portfolio of GT, supercar, Motorsport and Ultimate models are retailed through over 85 retailers in 40 markets around the world.
McLaren is a pioneer that continuously pushes the boundaries. In 1981, it introduced lightweight and strong carbon fibre chassis into Formula 1 with the McLaren MP4/1.
Then in 1993 it designed and built the McLaren F1 road car – the company has not built a car without a carbon fibre chassis since. As part of the Ultimate Series, McLaren was the first to deliver a hybrid hypercar, the McLaren P1™. In 2016, it announced a new hybrid hyper-GT would be engineering, confirming this next Ultimate Series car as the Speedtail in 2018.
2019 saw McLaren launch the 600LT Spider, the new GT and the track-only McLaren Senna GTR. It also unveiled the 620R and McLaren Elva before launching the 765LT the following year.
Most recently, the company unveiled its all-new high-performance hybrid supercar, the McLaren Artura.
The Artura is the first McLaren to benefit from the McLaren Carbon Lightweight Architecture (MCLA). The MCLA is designed, developed and manufactured at the McLaren Composites Technology Centre in the Sheffield region of England using world-first process and will spearhead the brand’s electrified future.
McLaren Automotive also chooses to partner with like-minded world-leading companies and organisations who push the boundaries in their respective fields. These include AkzoNobel, Ashurst, Dell Technologies, Gulf, Pirelli, Richard Mille and Tumi.
McLaren Group: The McLaren Group is a global leader in luxury automotive and technology and comprises three businesses: Automotive, Racing and Applied.
https://www.myluxepoint.com/wp-content/uploads/2021/07/Small-13048-McLaren720SGT3X-1.jpg8261500Carloshttps://www.myluxepoint.com/wp-content/uploads/2019/01/logo2v-300x88.pngCarlos2022-01-14 10:30:442022-01-14 11:12:23McLaren Customer Racing takes track performance to a new level with the 720S GT3X